E-mail: service@1001718.com
E-mail: service@1001718.com
ChatillonTT氣動力測試儀
ChatillonTT氣動力測試儀Chatillon®TT係列是一種氣動儀測量導線、端子、連接器、電線包裹的斷裂強度等。它是理想的地區,內在的安全是必需的(當使用一個機械表)。該測試儀工作使用清潔,幹燥的空氣,Z大的空氣壓力高達160磅(11.2巴)。TT試驗機滿足mil-t-7928(ASG)要求卷曲,無耳。
ChatillonTT氣動力測試儀的詳細資料
ChatillonTT氣動力測試儀
The CHATILLON® TT Series is a pneumatically-operated tester for measuring breaking strength of electrical leads， terminals， connectors， wire wraps， etc.
It is ideal for areas where intrinsic safety is required (when used with a mechanical gauge). The TT Tester operates using clean， dry air with a maximum air
pressure up to 160 psig (11.2 bar). The TT Tester meets MIL-T-7928 (ASG) requirements for crimped， solderless lugs. The tester may be used for tensile
or compression testing. The rapid test speed makes it ideal for production line testing， incoming inspection testing or for the R&D laboratory. The TT Tester
features a 6-inch (15 cm) test stroke. Ram speed may be controlled as low as 0.1-inch (2.5mm) per minute. The TT Tester is available in two models： one
with a foot-actuated switch; the other with a hand-actuated switch.
Features
n Simple to Operate
n Meets MIL-T-7928 (ASG) Requirements
n 6-inch Stroke
n Precise Ram Speed Control to 0.1 in/min
n Independent Return Speed
n Automatic Retracting Jaws
n Mounts to Chatillon DF Series Force Gauges
n 1 Year Warranty
Specifications
Load Capacity： 500 lbf， 2.5kN
Sample Size： Up to 15 inch (380mm) ChatillonTT氣動力測試儀
7/32 OD
Crosshead Speed： 6 in/min
Travel： 6 inches (152mm)
Jaw Opens： 7/32 inch (5.6mm)
Jaw Closes： 1/2 inch (12mm)
Load Measurement： Chatillon DF Gauges
Air Motor：
For 225 lbf (1kN)： Requires 60 psi (4.2 bar)
For 550 lbf (2.5kN)： Requires 125 psi (8.7 bar)
Operating Temperature： 40°F to 110°F
5°C to 45°C
Instrument Weight： 50 lbs (25 kg)
Shipping Weight： 65 lbs (30 kg)
該產品由深圳市小黄鸭视频下载電子科技有限公司提供，銷售商地址位於深圳市南山區前海路振業國際商務中心1206。請您仔細閱讀產品使用說明書，正確使用。
如果想試用該產品，請以下單位：
小黄鸭视频下载電子主要銷售通信設備、儀器儀表、電力設備、熱工儀表、校準設備及工具配件。
|
||||
|
||||
 |
3183402039